News & Events
Please follow CORRECT assembling procedures
Please PREPARE one hexagon screwdriver and one torque wrench
1. HOLD / Fix one side
2. The other side to be screwed in tightly. (and then do the same for another side)
HIGHLY ATTENTION: Torque must be 18kgf-cm ± 1kgf-cm
- Check if the nylock screws are fully tightened
3. Do not use the lift scale when the screw is loose
4. Must be fully screw-in
It is highly PROHIBITED if using one side screw-in only as
the joint will not be fixed which may cause unexpected
injuries or incidents on the lift scale / system.
CHARDER ELECTRONIC CO., LTD.
NO.103 KUO CHUNG ROAD, DALI DISTRICT, TAICHUNG CITY 41262, TAIWAN
TEL: +886(4) 24063766
FAX: +886(4) 24065612